Having a Samsung washer not spinning can be a very frustrating experience. If you have this issue, there are a few things that you can try to help your washer start working again.
Dealing with heavy washing loads
Getting the most out of your Samsung washing machine is not just about getting the best laundry results, but also about keeping it running as efficiently as possible. Samsung washing machines are well known for their energy-efficient designs. In addition, they feature a number of innovative features.
For instance, a Samsung washer will add extra water during the spin cycle. This is done to help remove extra dirt and debris. The result is a cleaner, drier laundry. However, if the load is too heavy, it may not have enough momentum to keep rotating. The result is a less-than-impressive laundry job.
Another feature that may help keep your Samsung washer running smoothly is a self-cleaning cycle. This enables your appliance to clean out the insides of the tub and other parts.
The Samsung SmartThings app, available for Android and iOS devices, allows you to schedule your cleaning cycles, and even receive notifications about when the cycle is finished. The app also allows you to use your smartphone to remotely control some of your appliances.
Read More :8 Best Lensa Photo Editor Features and App Review
Blocked drain pump filter
Often, a blocked drain pump filter is the cause of an error code on Samsung washers. These types of error codes are typically 5C, which means that the pump is not working correctly. In order to fix this error code, you’ll need to drain the washer, unplug the machine, and check the pump.
A blocked drain pump filter can prevent the washing machine from draining correctly, so you need to clear it out every month. A blocked filter is usually caused by a buildup of lint and debris.
To clear a clogged filter, you’ll need a bowl, some dish soap, and a soft-bristled brush. First, you’ll need to remove the filter. You’ll want to turn the filter cap clockwise until it is fully removed.
Once you’ve removed the filter, you’ll need to rinse it out. This can be done with a soft brush under running water. You’ll also need to clean the filter housing.
Once the filter is clean, you’ll want to replace it. This will ensure that the machine drains properly. The filter should be cleaned once every forty loads of laundry.
Problem with hose
Having a problem with the hose on your Samsung washer is frustrating and annoying. Luckily there are several simple solutions to help you get it running again.
The first thing you should do is to make sure that your incoming water supply is working properly. This includes checking the tap that connects to your washer. If it doesn’t appear to be fully open, you may need to remove it and replace it with a new one.
The next step is to check your washer’s filter. This can get clogged over time, and cause your washer to slow down or stop draining. The filter is located in the bottom right corner of the washer. You can access it by unscrewing the cap and turning it to the left.
You can then rinse the filter in clean water to remove any debris. If you have a drain snake tool, you can use that to clear your hose. If you don’t, you may need to take a screwdriver to remove any screws that are holding the hose in place.
Door Latch/lock and lid switch
Several top load Samsung washer models have a lid switch that helps prevent the washer from spinning if the lid is not closed. The switch is located within a small gray or black plastic box. It is usually secured to the top panel by a series of clips. The switch is also connected to a wire harness.
In order to access the switch lock, the top panel must be removed. Two brackets secure the panel in place. To adjust the top panel, lift slightly and pull forward.
The switch lock itself is a large assembly. To replace it, you need a nut driver. You may need to remove two to four mounting screws. Once the mounting screws are removed, the switch lock can be pulled out and a small prying tool can be used.
A multimeter can test the lid switch for continuity. It should show a reading of at least 0.1. If the switch is broken, you should replace it. It is possible to get the switch to work by simply resetting the circuit.
Program crash
Whenever a Samsung Washer program crash occurs, you may find yourself confused about what to do next. This could be due to the error code or because the machine failed to perform the aforementioned task.
The Samsung Washer program crash is the result of a faulty water inlet valve. This can occur when the water inlet valve gets stuck in a closed position. In such a scenario, the control module will be unable to give the proper signals.
Hence, the laundry will not spin properly. In such a situation, you should not panic. Instead, you can use the Home Label Kit to check your control panel. This kit includes a control panel guide, plus additional safety instructions.
You can also use a multimeter to test the door lock or lid switch for continuity. This should prove to be beneficial, especially if you’re unsure of what to do next.
The Samsung Washer program crash may also occur when the lid or door of the machine is faulty. In this case, you should move the laundry to a flat surface and make the load equal. If the load is not even, it will cause the machine to spin incorrectly.
Motor fault
Often, Samsung washers may experience a motor fault. When this happens, the machine will display a 3E error code. This error is caused by an excess amount of electrical current flowing to the motor, which causes it to spin the drum at a faster rate than it should.
When this happens, the first thing to look at is the motor hall sensor. This part of the system measures the speed of the drum, based on the magnetic field produced by the rotor magnets. If this sensor isn’t working properly, the motor will not be able to rotate at its highest speed.
Another problem can be caused by a foreign object in the machine. This can clog the water hose or the pressure system. It can also cause a break in the main module of the washer. This can reduce the engine’s power.
If you’re unsure about what the problem is, you can try to reset the machine by unplugging it for a few minutes. After that, restart the machine.
If you can’t resolve the issue, it may be time to contact a technician. They can check the control board for burned out components. If this is the case, you may need to replace it.
Suspension Rods and Shock Absorbers
Having problems with your Samsung washer not spinning is not a fun situation. The reason for this is that it may have an unbalanced load or an unbalanced drum. The problem with these is that the washer can’t spin properly and therefore will not remove all the water. If your washer is out of balance, you will have to fix the problem immediately. Here are a few steps you can follow to get your washer back on track.
The first step to fixing an out-of-balance Samsung washer is to remove the top panel. If your machine has an internal drain hose, you can disconnect the hose and unplug the drain pump. If it’s an external drain hose, you can unplug it from the back of the washer.
Once you have unplugged the drain pump, you should remove the top panel. This will allow you to access the shock absorbers. If the shock absorbers are damaged, you should replace them. Typically, front loaders have four shock absorbers.
You can also check the drive belt. A defective drive belt can cause a squealing noise. Also, it can cause oil to leak under the belt.
Drum nut loose
Having a drum nut loose on your Samsung washer can make it hard to spin your clothes. This can be caused by a number of factors. Some of the common causes include an unbalanced load, faulty suspension, and a broken shock absorber.
In addition, there is a chance that the washing machine may be leaning, which stresses the shocks. Alternatively, there may be a faulty motor. If this is the case, it may require a qualified technician to repair.
Another problem that can prevent the washer from spinning is a faulty door lock. The door lock may have an electrical problem or a faulty design. This is why it is important to consult the owner’s manual before replacing the door lock.
If you’re having trouble with your Samsung washer, you can get help from Samsung customer service. They can also give you tips on how to repair your appliance.
The first step to diagnosing a problem with your Samsung washer is to check the level of the washer. This is important for both safety and efficiency. A level washer can prevent stressing the shocks and bearings.
